07 4155 2828
info@ppbundy.com

The Various Type of Tap Troubles and Their Solutions You Need to Know About

Excellent Plumber Rating

Excellent Plumber Rating

Excellent Plumber Rating
Excellent Plumber Rating

MPAQ Member Fully insured and licensed

Sooner or later, your taps may start to malfunction and exhibit one or more problems. The problems may be minor, but occasionally, they may point towards a more serious underlying issue with your plumbing. In this post, we’ll take a look at the most common tap issues that plague property owners in Bundaberg.

Before we start looking at the problems in detail, we’d like to state right off the bat that whenever you experience any plumbing issues, you should immediately contact professional plumbing services. Going the DIY way may harm more than help, which can end up costing you a lot of money to fix. So, with that being said, let’s get back into the groove of things and take a closer look at all the common tap troubles along with their solutions.

1. Leaky or Dripping Taps

A drippy or leaking tap may indicate a problem with its washer or seal. Faulty washers or seals are typically encountered with independent cold and hot taps. In such a scenario, the best thing to do would be to very cautiously remove the washer and/or seal and have the faulty components replaced by a professional plumber in Bundaberg.

If you’re unsure about removing the washers and/or installing them, don’t take an unnecessary risk in trying to do everything on your own, as you may end up damaging other components that are working just fine. If you detect the drip or leak in a bathroom mixer tap, the problem may lie in the ceramic cartridge that stays within the tap. Replacing the cartridge is as easy as replacing the washers and seals of separate cold and hot taps.

2. Reduced Water Pressure

When water pressure goes down, the flow of water is severely affected. This comes to the surface when you turn a tap open. A change in water pressure doesn’t necessarily mean that there’s something wrong with your tap. It could very well be a problem with the external water mains or a half-open stop valve. It may also be triggered by multiple water systems running simultaneously.

It’s best to ask a reputed plumbing professional to pay you a visit to figure out what exactly is affecting the water pressure. If it is indeed a tap issue, it’s most likely due to locked air inside the pipes connected to your tap.

3. Limescale Deposit Build-up

Property owners residing in places with hard water often complain of built-up limescale deposits on their plumbing. While a little build-up isn’t really a great cause for concern, over time, a little may end up becoming a lot, and that is a problem. If the limescale deposits aren’t cleaned from time to time, they can severely restrict water flow and reduce the efficiency of your plumbing

Dealing with limescale deposits is something that you can do on your own. Simply get a branded cleaning product meant for removing limescale deposits or use vinegar or lemon juice to loosen the deposits. Once the deposits are loosened up and broken down, scrub them off.

So, the next time you encounter one of these common tap troubles, you’ll know what to do, won’t you?