The Various Type of Tap Troubles and Their Solutions You Need to Know About

Excellent Plumber Rating

MPAQ Member
Fully insured and licensed


Google Rating

Review stars

Sooner or later, your taps may start to malfunction and exhibit one or more problems. The problems may be minor, but occasionally, they may point towards a more serious underlying issue with your plumbing. In this post, we’ll take a look at the most common tap issues that plague property owners in Bundaberg.

Before we start looking at the problems in detail, we’d like to state right off the bat that whenever you experience any plumbing issues, you should immediately contact professional plumbing services. Going the DIY way may harm more than help, which can end up costing you a lot of money to fix. So, with that being said, let’s get back into the groove of things and take a closer look at all the common tap troubles along with their solutions.

1. Leaky or Dripping Taps

A drippy or leaking tap may indicate a problem with its washer or seal. Faulty washers or seals are typically encountered with independent cold and hot taps. In such a scenario, the best thing to do would be to very cautiously remove the washer and/or seal and have the faulty components replaced by a professional plumber in Bundaberg.

If you’re unsure about removing the washers and/or installing them, don’t take an unnecessary risk in trying to do everything on your own, as you may end up damaging other components that are working just fine. If you detect the drip or leak in a bathroom mixer tap, the problem may lie in the ceramic cartridge that stays within the tap. Replacing the cartridge is as easy as replacing the washers and seals of separate cold and hot taps.

2. Reduced Water Pressure

When water pressure goes down, the flow of water is severely affected. This comes to the surface when you turn a tap open. A change in water pressure doesn’t necessarily mean that there’s something wrong with your tap. It could very well be a problem with the external water mains or a half-open stop valve. It may also be triggered by multiple water systems running simultaneously.

It’s best to ask a reputed plumbing professional to pay you a visit to figure out what exactly is affecting the water pressure. If it is indeed a tap issue, it’s most likely due to locked air inside the pipes connected to your tap.

3. Limescale Deposit Build-up

Property owners residing in places with hard water often complain of built-up limescale deposits on their plumbing. While a little build-up isn’t really a great cause for concern, over time, a little may end up becoming a lot, and that is a problem. If the limescale deposits aren’t cleaned from time to time, they can severely restrict water flow and reduce the efficiency of your plumbing

Dealing with limescale deposits is something that you can do on your own. Simply get a branded cleaning product meant for removing limescale deposits or use vinegar or lemon juice to loosen the deposits. Once the deposits are loosened up and broken down, scrub them off.

So, the next time you encounter one of these common tap troubles, you’ll know what to do, won’t you?

Leaking tap with continuously dripping drops of water are common sights in households. In our busy lives, it is highly likely to push the repair of taps and wait for some free time at hand. However, you must know that these taps with leakages are quite dangerous and hence it is advised that you quickly act to fix them up. Experts suggest that as soon as you notice a leak in any of the taps you must call for an emergency plumbing service. Sometimes you might be tempted to go the do-it-yourself way and fix the problem, however, if you have an iota of doubt about your capacity to fully solve the issue you must call for a professional service provided.

Here are some of the most common reason to fix the leaking taps:

  1. Health risks: Leaking tap cause problems like mould and mildew which can be hazardous to you and your family’s health. These problems are usually discreet and hidden in the structure and foundation of the house. By the time they become apparent they have caused a lot of damage already. Mould is a profoundly serious concern because of the toxic chemicals, mycotoxins it produces. These chemicals cause allergies and respiratory problems. Stagnant water, that gets deposited due to leakages in taps also becomes breeding ground for insects and bacteria. You can avoid these health risks by calling for an experienced professional service provider as soon as you notice a leak.
  2. To save water: It is estimated that a leaking tap can lead to wastage of up to 20,000 litres of water in a year. This number is a clear indication, that even a small leakage issue has a significant impact. Climate change and growing population are already putting our environment under a lot of pressure. If we do not fix leakages in tap on time, we will end up adding to the environmental issues.
  3. Save money: The cost of water has risen greatly in Australia and hence the homeowners cannot ignore. If you do not fix the problematic tap in time and the issue becomes serious you might have to replace the entire system which will cost you heavily.
  4. Prevent structural damage to your home: Taps that have a leakage can result in structural damages to your home if they are left unchecked. Some of the most common damages are the ones to the foundation, walls, or doors. Fixing these structural damages is a very costly and time-intensive affair. It is prudent to call for emergency plumbing services the minute you see a leak and not wait for the problem to grow bigger.

A plumbing problem like a tap that has some leakage might look like a minor problem initially. However, it can lead to several serious problems and more permanent damages if it is left untreated. You must get this fixed by an expert who can dive into the root cause of the issue. If you need help with any plumbing service for your home, you can reach out to us at Platinum Plumbing. Write to us at or give us a call on 0741552828.